Topklean™ EL 7

Odourless solvent based cleaner formulated to remove all types of solder pastes from printing stencils, using an automatic set up routine included in most SMT printers.

  • Removal of solder paste on stencils & misprinted PCB’s
  • Automated stencil cleaning process inside SMT printer
  • High flash point & compatible with most common materials

PERFORMANCE

  • Excellent cleaning of leaded & lead free solder pastes
  • Compatible with most common materials

HSE

  • Very low toxicity
  • RoHS & REACH compliant
  • Flashpoint above 60 degrees, which eliminates the need for explosion proof equipment.

Quicksolv™ DEF90

Multi-purpose industrial cleaner for manual cleaning of oils, greases, organic residues & solder flux residues. Thanks to its low surface tension and reactive substances it permits to solubilize most of organic pollutants. Its fast evaporation allows substantial reduction in cleaning time.

  • Multi-purpose cleaner for degreasing & defluxing
  • Manual cleaning
  • Non-flammable & fast evaporation

QUICKSOLV DEF90 is a non-flammable product and is a drop-in replacement for flammable solvents like gasoline, isopropanol or acetone or any flammable cleaning products. It’s formulated with safety, health of operators and environment in mind.

It can be used for many applications:

  • Maintenance of mechanical parts
  • Degreasing of low volume production of metal parts in micromechanical & mechanical industry
  • Defluxing of printed circuits in rework or low volume production.
  • Removal metals particles in additive manufacturing
  • It can also remove certain residues of glue, varnish, coatings or polymerized materials, but subject to prior tests.

PERFORMANCE

  • Removal of all type of organic residues
  • Fast, efficient and easy cleaning
  • Compatible with all metals

HSE

  • Non-toxic & no CMR substances
  • Low environmental impact: low GWP, No ODP
  • Non flammable & no flash point – safe substitution to IPA & other flammable cleaners

Promoclean™ Disper 610

Water based alkaline cleaner formulated with a high wetting power to remove all types of baked-on flux residues left on reflow oven condensation traps, conveyer belts, wave soldering pallets.

  • Aqueous cleaner for removal of back-on flux residues
  • Spray in air, immersion jet & immersion process
  • Compatible with all metals

Ease of maintenance is a key consideration to reduce the equipment cost of ownership. PROMOCLEAN DISPER 610 provides an excellent cleaning power contributing to speed up the maintenance cleaning process, which reduces equipment downtime time and loss of production; recommended for high volume electronics manufacturing sites.

This is a Greenway product.

Label given to this product:

  • no toxic substances
  • reduced corrosivity
  • reduced VOC
  • Reduced ecotoxicity
  • Reduced chemical oxygen demand (COD)
  • formulated with more then 50% natural recources

PERFORMANCE

  • The low surface tension allows cleaning in areas usually inaccessible for standard detergents.
  • Compatible with all metals
  • No rinsing required

HSE

  • Non-toxic & no CMR substances
  • Non-flammable, no flashpoint
  • Biodegradable
  • low corrositivity

Topklean™ EL 606

Especially designed to clean stencils and misprinted PCB’s from unsoldered solder paste used in SMT processes. Most uncured SMT adhesives can also be cleaned. It`s delivered as a pure product and need to be mixed with DI water.

The neutral pH of TOPKLEAN EL 606 guarantees a long lasting use of all stencils and stencil cleaning equipment of major brands on the market today.

  • Removal of solder paste on stencils & misprinted PCB’s
  • Aqeous spray or immersion process
  • Fast cleaning with very low HSE impact

PERFORMANCE

  • Excellent & fast cleaning even with a neutral pH
  • No foaming
  • Long bath life due to excellent filterability

HSE

  • Very low toxicity
  • RoHS & REACH compliant
  • pH neutral, non corrosive.
  • Non flammable & no flashpoint, which eliminates the need for explosion proof equipment.