CT-2030-2

Connector Insertion Machine

Press-fit technology is that inserting flexible or rigid pins of connectors into plated through holes (PTHs) of printed circuit board (PCB) without soldering. It is reliable and easy to operate. The basic requirement is that the diameter of press-fit zone must be greater than the diameter of PTH. During the press-fit process, there is deformation of the pin. Thus, the pin slides into the hole and is connected with the PTH tightly.
REQUEST A QUOTE

KEY FEATURES

  • Equipment adopts inline operation, and the flow line direction is from left to right.
  • Controlled by PC, and the operation, inspection, judgment and other work elements are all controlled by program.
  • Vision system realizes mark point positioning, Top side 2D code scanning and connector true position detection.
  • Single connector pins can be photographed at the same time.
  • Automatically adjust the width of fixture conveying track, width range is 100-300 mm.
  • MES system with real-time communication ability.