PCB Buffer

Model: HY-460BF

For storing PCB board temporarily in the middle position of SMT line.
DOWNLOAD BROCHURE

Hayawin PCB Buffer are components that are used to isolate or buffer signals in a circuit board. They are commonly used to protect sensitive components from noise or to isolate different sections of a circuit. SMT PCB buffers are typically used in high-speed or high-frequency circuits, where they can help to reduce crosstalk and improve signal integrity. They are available in a variety of sizes and configurations to suit different applications and can be used in a wide range of electronic devices, including computers, smartphones, and other consumer electronics.

Features and Benefit

  • Behind master device, as a buffer when the line speed is not coordinated.
  • Behind the oven for buffering and cooling, preventing the board stuck inside the oven
  • 20 slots made by aluminum alloy for storing boards, 3.5mm flat belt transferring.
  • Panasonic PLC controller with various options
  • Buffer with FIFO, LIFO, close-in first out and pass-through modes selectable
  • Selectable pitch setting: 25, 50mm
  • Enclosed construction to improve level of safety
  • TFT touch screen, easy to operate
  • SMEMA compatible

Specifications

  • Dimension: L600*W1240*H1800mm
  • Min PCB size: L80*W50mm
  • Max PCB size: L480mm*W460mm
  • Transport height: 920±30mm
  • Transfer direction: Left to right or right to left
  • Interface: SMEMA
  • Cycle time: Approx.15 Seconds
  • Pitch distance: 25,50mm
  • Max Buffer capacity: 20pcs
  • Power supply: 220V 50HZ
  • Air supply: 0.4～0.6Mpa
  • Power voltage: 800W
  • Board thickness: min 0.4mm
  • Pitch select: 25,50mm

Applications of Hayawin PCB Buffer

  • Isolating sensitive components: SMT PCB buffers can be used to isolate sensitive components, such as voltage regulators or analog-to-digital converters, from noise and other interference.
  • Buffering signals: SMT PCB buffers can be used to buffer signals, which can help to reduce crosstalk and improve signal integrity in high-speed or high-frequency circuits.
  • Protecting inputs: SMT PCB buffers can be used to protect the inputs of a circuit from overvoltage or other damaging conditions.
  • Isolating different sections of a circuit: SMT PCB buffers can be used to isolate different sections of a circuit, which can be helpful in preventing interference between different signals or subsystems.
  • Improving signal-to-noise ratio: SMT PCB buffers can be used to improve the signal-to-noise ratio of a circuit, which can be important in applications where a high level of precision is required.